Data Sheet (English)

Inductive sensor
With switching distance
BI4-M12-AP6X-H1141
■
Threaded barrel, M12 x 1
■
Chrome-plated brass
■
Large coverage
■
DC 3-wire, 10…30 VDC
■
NO contact, PNP output
■
M12 x 1 male connector
Wiring diagram
BI4-M12-AP6X-H1141
46070
Rated operating distance Sn
Mounting condition
Assured switching distance
Repeatability
Temperature drift
Hysteresis
Ambient temperature
4 mm
flush
ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 10 %
3…15 %
-25…+70 °C
Operating voltage
Residual ripple
DC rated operational current
No-load current I0
Residual current
Rated insulation voltage
Short-circuit protection
Voltage drop at Ie
Wire breakage / Reverse polarity protection
Output function
Protective insulation
Switching frequency
10…30VDC
ð 10 % Uss
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
yes/ cyclic
ð 1.8 V
yes/ complete
3-wire, NO contact, PNP
÷
2 kHz
Construction
Dimensions
Housing material
Material active area
Max. tightening torque housing nut
Connection
Vibration resistance
Shock resistance
Protection class
MTTF
threaded barrel, M12 x 1
52 mm
metal, CuZn, chrome-plated
plastic, PA
10 Nm
male, M12 x 1
55 Hz (1 mm)
30 g (11 ms)
IP67
2283 years acc. to SN 29500 (Ed. 99) 40 °C
Switching state
LED yellow
Functional principle
Inductive sensors detect metal objects contactless and wear-free. For this, they use a
high-frequency electromagnetic AC field that
interacts with the target. Inductive sensors
generate this field via an RLC circuit with a
ferrite coil.
Edition • 2014-10-24T14:10:02+02:00
Type code
Ident no.
1/3
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Inductive sensor
With switching distance
BI4-M12-AP6X-H1141
2xB
Distance W
3 x Sn
Distance T
3xB
Distance S
1.5 x B
Distance G
6 x Sn
Diameter of the active area B
Ø 12 mm
Edition • 2014-10-24T14:10:02+02:00
Distance D
2/3
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Inductive sensor
With switching distance
BI4-M12-AP6X-H1141
Accessories
Type code
Ident no.
Description
QM-12
6945101
Quick-mount bracket with dead-stop; material: Chrome-plat-
Design
ed brass Male thread M16 x 1. Note: The switching distance
of proximity switches can be reduced by the use of quickmount brackets.
BST-12B
6947212
Fixing clamp for threaded barrel devices, with dead-stop; material: PA6
MW-12
6945003
Mounting bracket for threaded barrel devices; material: Stainless steel A2 1.4301 (AISI 304)
BSS-12
6901321
Mounting bracket for smooth and threaded barrel devices;
material: Polypropylene
Wiring accessories
Type code
Ident no.
Description
RKC4T-2/TEL
6625010
Connection cable, female M12, straight, 3-pin, cable length: 2
Design
m, sheath material: PVC, black; cULus approval; other cable
Edition • 2014-10-24T14:10:02+02:00
lengths and qualities available, see www.turck.com
3/3
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com