close

Вход

Забыли?

вход по аккаунту

код для вставкиСкачать
ABLUTION HOSE APPLICATIONS
A valve must be used to control
water flow from ablution hose.
Sample drawing for 6270 WC pan.
ABLUTION HOSE APPLICATIONS
Standard application
Concealed application
(water connection visible)
(water connection inside the wall)
STANDARD ABLUTION HOSE APPLICATION
Valve to control water flow
Flexible hose is
visible
STANDARD CONNECTION (CONNECTION FROM THE SIDE)
Flexible hose will be inserted through hole on the side of the WC pan.
STANDARD CONNECTION (CONNECTION FROM THE SIDE)
Flexible hose will be connected to the valve on the wall.
CONCEALED CONNECTION (CONNECTION FROM THE BACK)
Flexible hose will be left on the back of WC pan, not passed thru the hole on the
side. Flexible hose will be connected to the valve from the back of WC pan as
concealed. The connection between valve and WC will be inside the wall and not
visible like shown in the next slide.
CONCEALED ABLUTION HOSE APPLICATION
Valve to control water flow
Connection pipe is
invisible, inside the wall
All these pieces are pre-installed in the factory to the WC.
After preparing the pipe work, inlet water is connected to the
ablution pipe via threaded end and it is ready to use.
Ablution hose in up segment
Ablution hose in mid / mid-low segment
1/--страниц
Пожаловаться на содержимое документа